AFUNTACompatible CB09 CB09U Graphtec Blade Holder Base with 30 pcs (30/45/ 60 Degree) Vinyl Cutter Plotter Cutting Blades Silhouette Cameo

This blades and holder work well with my Graphtech CE7000

Easy to set up - follow the tutorial by Kelly Rossouw - CB09 Blade Setup on YouTube. Fits in the blue adapter for the portrait which has the autoblade set up on the back. Worked first time. Comes up as pen in the Send Menu - just change it to action to cut instead of sketch. Very happy - wish I'd done it earlier. Also arrived within 2 days.

First and foremost this doesn't fit a silhouette machine so move on if that's your kit. The tool does not fit into the adapters that come with the Cameo 4.I am fortunate enough to own a resin printer so making an adapter that fits was an option. I'd suggest if you have an FDM printer you might struggle. The adapter needed is very delicate and unless your filament printer is super dialed in you might struggle.That aside let's assume you have an adapter and you can fit it into the holder. It doesn't get any better from here on in. I have tried the yellow blade in thick board and it didn't cut it.... Literally. Not deterred I then tried the red blade in card stock of varying thickness and it basically never made it through the material and absolutely shredded the card. I tried dozens of minor adjustments and as yet not had one success. I just can't imagine there being a single material these blades can cut.All in all, give it a wide berth.

Managed to cut thick glitter sticky backed card on my first use using the blue 60 degree blade which my original blade couldn't.Some other reviews stated the blades are to thick to fit, But there are two different cb09 blade holders.1. where the blade fits into the main body of the holder with the spring on the blade.2. and one where it fits into the black cap with the spring brass cup. (no spring on the blade)Search Youtube for (Silhouette Cameo - How to cut felt blade cb-09 review) it shows both.Mine is the second one.I also made my own blade rule template with silhouette machine.

Bought this cutter to use with My Cameo4, easy to set up and do a fantastic job of cutting vinyl, paper and card, also used them with success to cut mylar for stencils, very happy with them :)

The media could not be loaded. Finally I can cut small design ( with yellow 1) blade deep(3) force (5) pass (2) speed (3)

Works like a charm!Genuine blade is almost the same price as this except with this you get LOADS of blades!I finally got round to using this today, there are loads of videos on youtube explaining how to assemble and set it up so just search for 'cb09' and your vinyl cutter.Be careful when inserting the blade through the nozzle and do a few test prints to see how well it's cutting before cutting a large piece.

Bitterly disappointed and frustratedI don’t understand why an inferior metal is used . I will look for tungsten in the description going forwardsUnless I just had a bad batch - it was the 60 degree cutters I usually use them for everythingThe blade holder is generic and very useful in all my silhouette machines