UL Recognized Dimmable LED Driver 12V 24W Triac Dimming LED Power Supply IP67 Waterproof, LED Transformer Dimmable, 12 Volt Constant Voltage Adapter,120V AC Line Dimming for LED Strip Light 2 Amp

I wanted to swap-out halogen MR 16 bulbs to LEDs. This transformer worked well. However, I did not realize the MR16, due apparently to lack of space in the base, do not the electronics to dim about more than half. (Lutron has some application data sheets on this topic, such as Note #559.) Other types of LED bulbs may have more capability. After blowing out a dimmer and trying different LED bulbs, I came with this combination: This transformer which fits into a double switch wall box. A Lutron Diva DVELV-300p dimmer, Phillips LED MR16 6.4W 12V DC bulbs. Make sure the MR16 bulbs you buy are DC, not AC. The Phillips bulbs were equivalent to 35W incandescent but still very bright and bluish (3000K). I used three layers of Light Dims sheeting (white) to get the intensity down, but the a bluish tinge was still there. I added one layer of the lightest orange tint of Alzo gel filters. The result is similar, but not exactly the same as 50W halogens dimmed 3/4ers of the way down. As as noted, the MR16s still do not go all the way off. I'm not totally pleased, but it's acceptable. This report is just for MR!6s; strip lighting and other bulbs may act differently. If you really want good advice, get to knowledgeable people at a lighting store...which is perhaps what I should have done first.

We had some shelves put in to match our beams in the living room and had our electrician come over and prep it and help me pick out what puck lights to buy along with the transformer, and this is what he chose. It works perfect! We were able to dim them all the way down which is exactly what I wanted! They look great and work perfect with this.

I am running four 3-watt LED recessed lamps on this driver. No issues present but it does get hot - hotter than I would prefer but maybe that's just the way it is supposed to be.

This LED driver is a good working, very reasonably priced unit. I'm driving 9ft of SMD2835 light strip in an under cabinet installation. We wanted to keep the installation more traditional/professional using a regular wall dimmer switch mounted in the granite backsplash in our kitchen. I installed an LED compatible dimmer switch then wired through the wall to just under the upper cabinets and mounted this driver there. I made a wire raceway out of same cabinet wood to the front of the cabinets and ran the LED strips. This driver worked exactly as we hoped for our application. It's able to vary the light from very low to full bright with no buzzing. I just finished installing it and will say this is a great product.The longevity of this functioning driver is directly proportional to the longevity of the five stars rating I'm giving it today.

This was supposed to be a replacement AC-DC driver for a kitchen island ceiling LED lamp. While it has nearly identical specs as the one it replaces, it would only drive the LED to be barely lit (even with wall controller at full power setting. Very disappointing - don't waste your money...

Was an easy install and so for works great and esp dimmable

Works as designed

Seems to work although it gets pretty hot. It's powering about 10ft of leds. Can't really comment on longevity this early

Excellent quality LED driver. My kitchen cabinet lights don't flicker anymore.