Tetra-TeknicaEssentials Series XLWS-1P Extra Large Microphone Windscreen for Blue Yeti, MXL, Audio Technica, and Other Large USB Microphones, Color Black

Item was exactly as described and shipped quickly.

Thank you

The media could not be loaded.  I'm posting my written evaluation prior to receiving my Blue Yeti, although I was able to perform some preliminary test results with my headset microphone which showed promising results.At a later time, I’ll update this written review after completion of more comprehensive testing.

Don't be misled right out of the package, the product won't just pop on one-size-fits-all. Like breaking in a new pair of shoes you will likely have to stretch the windscreen to fit over your mic. I cannot vouch for other mic brands or sizes but with a little wigglin', it's a perfect fit on the Blue Yeti.The windscreen was thick and durable enough for me to fit my fingers (I do have smaller fingers) underneath the foam while stretching a side on one at a time without worrying about ripping it, after the first attempt. Just go slowly and be patient, start with the top, then bottom, left then right and repeat until the desired fit is achieved.The windscreen itself does the job intended and helps to dampen excess huff and puff noise caused by certain harsh 'windy' letters (S, P, T, F, etc.) or breathing near the mic. For myself, it doubles as a pop filter and makes my voice slightly less annoying as well. A windscreen also helps to repel saliva. You should always use good protection for your expensive mic and this was it for a good price.The following picture illustrates me blowing profusely, directly into the mic from roughly 1 inch away. Absolutely no more peaking into the red unintentionally.

It's a loose fit but not long enough to fit an MXL 770 or any of my AT microphones. For that reason, it's being returned, I do not own a Blue Yeti. It's plenty thick enough.

It was confusing to me at first that the pop filter is the thing that looks like a round screen, while the windscreen (like this item) is not a screen but rather the foam that fits snugly over the microphone. The pop filter in my opinion is more beneficial for voice recording (like what I want to do) but I didn't like the way a pop filter looks or clips to my microphone so I went with the windscreen. Yup, my interest in this windscreen is strictly cosmetic - I knew would not benefit much from reduced wind noise because my Blue Yeti is sitting on my desk and not outside. This windscreen looked great on my black Yeti - it looked like it came with the microphone and not an aftermarket item. The diameter of the opening of this windscreen is 2". The Yeti's microphone is 2.5" so you will have to stretch and pull a bit to get the windscreen in place. All in all, the Blue Yeti probably performs just as well without this windscreen if you just position the microphone away from your direct breathing path… but I really dig the way my microphone looks with the windscreen on.

I needed the windscreen for my radio show at WWUH in Hartford, CT. Never worried about using the same screen with other DJ's until Covid19. Now it is necessary to use precautions and have our own. We have ElectroVoice R-20 microphones. The manufacturer was charging $32. I needed a windscreen with a 2" inside diameter. At $8 this will work fine. Quality slightly below the original and length is a little shorter, but it fits around the diameter of the mic perfectly and covers the hot part of the mic just fine. I bought a couple more for spares.

I bought this just to see if I could squeeze it onto my blue yeti. It worked, though I wouldn't recommend it unless you really want to spend the time with wiggling it on. It also feels a little flimsy, but hey, it's foam. It does filter sound though, enough that I can no longer hear the sound of my computer fans in audacity recordings, even with the gain maxed.Since I used this for a mic that it is noted it doesn't fit on and it still works, I think it will serve me well.

Unfortunately, I had originally purchased this for my Blue Yeti mic and when it arrived I realized it was too small to fit it. It's possible I might have read the dimensions wrong or something. Didn't get to use it, I'm sure it would have worked great, but the size was wrong for my mic.

Fits great on my yeti blue mic. I noticed better quality audio. First podcast I did I didn't have one of these. And I heard all the "clicks" or whatever their called when talking. Now I don't hear them anymore. So worth the money.

Le entró a presión a mi micrófono Blue Yeti, tuve que ponerselo poco a poco para evitar que se dañara, pero más allá de eso el accesorio es funcional y le da buena vista al micrófono, además se siente de buena calidad.

Fit perfectly on my blue yeti USB microphone.I bought another foam mic from another place and it kept coming off. So I am glad this one.ThanksRich

Perfect fit on Blue Yeti buy it if you don't want those POPS and it's cheap. Trust me about the fit the only thing I would be concerned about is the packaging it's basically a little cardboard box that offers little protection to the pop filter. Mine came perfectly fine though.