Adam's Iron Remover (16oz) - Iron Out Fallout & Stop Rust Remover Spray for Car Detailing Removes Iron Particles in Auto Paint, Wheels, Motorcycle, RV & Boat - Use Before Clay Bar, Wax or Car Wash

This, like all of Adam's Polishes products works great. Easy to use before you wash vehicle. You wont believe the amount of iron on your vehicle, especially if you park outside. This product works on your shower, tub & sinks if you have well water. No harsh acid smell like other iron removers. Does not harm your fixtures. A++++++

This is my go-to Iron remover. The products from and name of Adam's Polishes are proven. I have tried a few other brands and so far, nothing has surpassed Adams. Just put the product in a sprayer, spray it one, let it dwell, and rinse it off. I use it on all of the external surfaces of the vehicles. It is fun watch it turn the iron contamination the satisfying reddish-purple color as it removes the iron from the surfaces. Just be sure to not allow the product to dry on the vehicle. If you have not used this before there is a smell with this and most iron removers but nothing to be concerned about. This stuff is priced low enough and easy enough to be used by anyone at home and good enough to be used by the pros.

I've watch tons of car detailing videos on YouTube and always wanted to try this on my wife's white SUV as it's getting up there in age and the paint on the back hatch and in certain spots on the rest of the body is starting to show signs of needing restoration. I paired this iron remover with a clay bar (separately of course) and this returned her vehicle to it's former glory. We'd forgotten that her white paint had a bit of a pearl sheen to it up until this point. I'm planning on doing a wax job on it soon and I can't recommend this product enough. It smells decent and the purple running down the paint is kinda satisfying as this lets you know it's working.

Works good but dont let it dry it will streak like crazy

Hands down the best iron remover I've used. It does have a pretty terrible smell, but that doesn't matter much to me, it's super effective. Nice savings going with a 1 gallon container, just need to use an old bottle or supply yourself a new one.

I'm amazed at how effective Adam's Iron Remover is at protecting my car's finish. The new formulation (released June 2019) is a significant improvement over similar products I've tried. What sets this product apart is its ability to remove iron particles from your paint without any mechanical scrubbing - just spray and watch the magic happen!The science behind it is fascinating - when you apply it, the solution turns purple as it reacts with iron contamination, giving you a visual indicator that it's working. It's incredibly satisfying to actually see the harmful fallout being removed from your paint. Unlike clay bars that only handle surface contaminants, this product gets deep into the paint to remove embedded iron particles.One of the biggest improvements in this new formula is the reduced smell. If you've used other iron removers, you know they can be pretty overwhelming, but Adam's has managed to make this much more pleasant to work with. It's also pH neutral and acid-free, so you can feel confident using it on your clear coat or single-stage paint. Just remember to avoid getting it on trim and metallic surfaces.For best results, simply rinse your car first, then spray this on any painted surface (works great on wheels too!). The orange-colored formula makes it easy to see where you've applied it, and it activates quickly on contact. The fact that it's made in the USA and comes with a 110% satisfaction guarantee just adds to my confidence in the product.This has become an essential part of my detailing routine. For anyone serious about protecting their vehicle's finish from iron contamination, this product is absolutely worth the investment.

It does what all iron removes do melt embedded particles before or after claying. Spray on, let it sit, and bleed purple, then wash off with rinse or rinse with contact wash to remove all the staining. From my usage, all iron removers do the same job. The only difference is how bad the smell is when using the product. This one is diluted with an orange scent which is not strong enough to mask all of the nasty smell from iron removers, but it is way better than ones without any scent such as Carpro iron remover which made me want to hurl when I first used it. I would give this 5 stars if this was cheaper to buy in bulk such as their 5-gallon when it was on sale and with amazon prime so no shipping cost as the buyer. If their mega foam had prime shipping then it would be a good deal. I couldn't find any other brands that sell iron remover for less. It works well on all exterior surfaces of the car including wheels, brakes, and tires. It might cause some rusting on the metal brake rotors but those will come off when braking so no worries. Also, don't use it on damaged surfaces because iron remover is an acid. 3 Stars because the price is still steep for 1-gallon and 5-gallon (buy them in gallon or 5-gallon size when on sale, then use ur own spray bottle instead of their overprice small bottle versions). Another star was lost because of the smell which is not as horrific as Carpro iron x. Iron remover should only really be used when prepping your vehicle for ceramic coating or some other intensive application. Iron remover shouldn't be used in every car wash and only use when preparing a coating over the vehicle. So a gallon or 5 gallons will last you years if you DIY and not a business.

Spray on, wash off! Good stuff!