Invision Dual PC Monitor Arm Bracket Ergonomic Height Adjustable (Gas Assisted) Full Motion Long Arm Desktop Clamp Mount for 24”-35” Screens Tilt & Swivel VESA 75mm & 100mm Weight 2kg to 15kg (MX900)

Took about 10 mins to install, couple mins to tweak adjustment screws to match monitor weights, only had a few days but stays in position fine and very easy to move. Build is clean and seems to be good quality, very happy with purchase and on first impression there is nothing to fault.

These are my second set of invision monitor arms, after previously having the MX300's which started to show signs of wear after more than 5 years. I purchased these as they allow heavier screens so should be more durable.These were very easy to setup with easy to follow instructions. The adjustment ability is really good and the cable management holes are great too. The screens do sit slightly further forward than the previous arms as the arms are a bit chunkier, but it works well for me.Just be careful when mounting your screens as the gas struts are quite powerful even on their factory setting!

Perfect holder for two large 34-inch monitors. Easy to mount on the desk. You don't need any additional tools. Very stable and strong. He has two monitors connected to it. 34 inch and 32 inch. Both are very adjustable. Height, distance from the face and the angle from which you look at them. The handle is hydraulic. It does its job very well and looks very stylish on the desk. I highly recommend. It's better than a normal monitor stand because you save a lot of space on your desk. Worth your money.

The monitor stand came well packaged and had all of the necessary equipment, both types of stands come in the box (clamp and screw option).The monitor arms are made of a glossy metal material with some cheap plastics for cable management. The arms are very strong and I bought the arms to be slightly stronger than required, just to be sure they would hold my two monitors. The plastic parts were not perfectly manufactured as one of the plastic cable holders was slightly warped and did not attach securely to the metallic arm.The assembly is clear as long as you take your time and follow the instructions. There are two USB cables that become ports under the monitor stand, they can be removed easily but I decided to keep them on in the end. I could not use a hard drive plugged into the stand with the blue cable plugged into the back of my PC. I think the USB cables are an older generation and are not of a high rating. I found the USB cables did not charge devices quickly, and I don't really use them now.The arms came on the tightest setting and I assembled them without changing the tightness of the piston. I found that it was actually very difficult to push the arm down initially to adjust the tightness of the arm. I gave the arm about 20 turns to loosen the arm, the monitor arms are still quite stiff although I think I can loosen them further.The arms work effectively and the cable management worked for up to three cables per arm. I can also rotate my monitors to 90 degrees and I like that feature very much.Overall the product does exactly what it says and us exactly what I needed it for. The USB ports in my opinion are an unnecessary feature but some people may find use in them.

I used the clamp method of installation and found it a doddle on my own. It took me a few minutes to realise that you adjust the strength of the piston for supporting the monitor the opposite way to what looks intuitive, so definitely read the manual, but it's a great setup.The arms have excellent mobility, you can rotate the screens and the cable management is excellent. I'd probably prefer if there were caps/covers for fixings, just so you can hide the little allen key holes, but that's really not an issue, just a preference.The one piece of advice is to be cautious if you're fitting this to a desk that's right against the wall - because these arms (like all arms) will need some room behind the desk to articulate. You won't have a good time if your desk is flush against the wall, you'll end up having the monitors about 3 inches from your face.This is a really well made kit, sturdy and reassuringly strong. Very impressed.

Got the twin arm (up to 35inch monitor) and arrived in the box. One needs to assemble this unit. The base unit has 2 clamps (some only 1) which certainly helps if one has all round access to table etc. The arms are made out of Aluminium with plastic cable units which are good and tight, but can be removed for the cable transport. The VESA mounts are 75 and 100, so should fit my monitors.They are extremely well made, should last a long time.Only two gripes, first is the + and - marks for the tension of the arms and monitor, being black the same colour as the units, extremely difficult to see. Second is the instruction booklet for the assembly of the unit, a bit small, which means that the writing is even smaller, making it extremely difficult to read (even with my reading glasses on) they do supply via email a PDF copy which one can use to assemble the unit.Possibly include a direct link to the PDF would help.Would I buy this item again, YES I would.Would I recommend this to anyone, Yes I would even with the niggles, it seems to be a fantastic bit of equipment.Hope this helps.

A very solid and good quality product. Would definitely recommend it to anyone looking to mount dual monitors with ease and great flexibility on the various viewing angles and tilt options